Kia Optima: Inspection| 1. | Disconnect the negative(-) battery terminal. |
| 2. | Remove the lighting switch of the multi-function switch. (Refer to the multi-function switch) |
| 3. | With the front fog lamp switch,
make sure that continuity exists between the terminals below. If continuity is not as specified, replace the multi-function switch.
|
RemovalCertification label
The certification label is located on
the driver's door sill at the center pillar.
This label shows the maximum
allowable weight of the fully loaded
vehicle. This is called the GVWR
(Gros ...
Vehicle certification label
The vehicle certification label attatched
on the driver’s side center pillar gives the
vehicle identification number (VIN). ...
Installation
•
Install the component with the specified
torques.
•
Note that internal d ...