Kia Optima: Removal - License Lamp. Repair procedures - Lighting System - Body Electrical System - Kia Optima TF 2011-2024 Service ManualKia Optima: Removal

1. Disconnect the negative(-) battery terminal.
2. Remove the lens trunk trim.

(Refer to the BD group - "Trunk")

3. Replace the bulb (A) by turning it counterclock wise.


License Lamp. Repair procedures
...

Installation
1. Install the bulb. 2. Install the trunk trim. ...

See also:

Actual-Measurement Dimensions
Front side member tooling hole (Ø25) Side cover mounting hole (Ø9) Side cover mounting ...

Replacement
Front brake pads 1. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. Tightening torque:21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft) ...

ECM Problem Inspection Procedure
1. TEST ECM GROUND CIRCUIT: Measure resistance between ECM and chassis ground using the backside of ECM harness connector as ECM side check point. If the problem is found, repa ...

Copyright © www.kiopman.com 2024