Kia Optima: License Lamp. Repair procedures - Lighting System - Body Electrical System - Kia Optima TF 2011-2022 Service ManualKia Optima: License Lamp. Repair procedures

Installation
1. Install the overhead console lamp after connecting the sunroof switch connector and lamp connector. 2. Install the lens after tightening 2 screws. ...

Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the lens trunk trim. (Refer to the BD group - "Trunk") 3. Replace the bulb (A) ...

See also:

Steering Angle Sensor. Description and Operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line.The SAS is used to determine turning di ...

Teaching Procedures
1. Key Teaching ProcedureKey teaching must be done after replacing a defective PCM(ECM) or when providing additional keys to the vehicle owner. The procedure starts with an PC ...

Trip Switch Repair procedures
Inspection 1. Check the audio remote control switch for resistance between terminals in each switch position. [Trip + Reset] SwitchConnector terminalResistance (В±5%)Reset3 - 5 (LH)5.54 k?Trip ...

Copyright © www.kiopman.com 2022