Kia Optima: Installation| 1. | Install the overhead console lamp after connecting the sunroof switch connector and lamp connector. |
| 2. | Install the lens after tightening 2 screws. |
RemovalTorque Converter Control Solenoid Valve (T/CON_VFS). Schematic Diagrams
Circuit Diagram
...
Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents are
as follows:
1.
Connect self-diagnosis connector(16pins)
located in the lower of driver side crash pad to ...
Inspection
Armature Inspection
And Test
1.
Remove the starter.
2.
Disassemble the starter as shown at the beginning
of this procedure.
...