When all the doors (and trunk) are locked and closed, the room lamp will come on for about 15 seconds if any of the below is performed.
Inspection
In the state of IGN1 ON, when multi function switch module detects auto light switch
on, tail lamp relay output and head lamp low relay output are controlled according
to auto light sensor's i ...
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature
sensor connector.
3.
Measure resistance between sensor
signal terminal and sensor g ...
Rear Seat. Repair procedures
Replacement
Seat Assembly Replacement
1.
Remove the rear seat cushion
(A).
2.
Disconnect the rear seat heater
connectors (A).
3.
After ...