Kia Optima: Removal| 1. | Disconnect the negative(-) battery terminal. |
| 2. | Remove the lower (A) after loosening
the mounting screws. (Refer to the BD group - "Crash pad")
|
| 3. | Remove the heater control unit contained the rear glass defogger switch from the center fascia panel. |
Inspection
InstallationAdjusting the Front Seatback Recliner
To change the seatback angle, lean forward slightly and raise the lever located
on the outer portion of the seat. Slowly and carefully lean back to the desired
angle and release the lever. After ...
Installation
Installation is the reverse of removal.
Canister installation bolt:3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
...
Removal
1.
Remove the battery and the battery
tray. (Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
Tightening torque:7.8 ~
11 ...