Kia Optima: Removal
| 1. | Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line” in this group). |
| 2. |
Remove the fuel pump service cover (A) in the trunk.
|
| 3. | Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B). |
| 4. | Disconnect the fuel feed tube quick connector (C). |
| 5. |
Remove the fuel pump plate cover (D) after removing
the bolts.
|
| 6. |
Remove the fuel pump from the fuel tank.
|
Inspection
[Fuel pump]
1.
Turn the ignition switch OFF, and then remove battery
(-) cable.
2.
Remove the fuel pump assembly.
3.
Check motor operatio ...
Installation
1.
Installation is reverse of removal.
Be careful of fuel pump direction (Refer
to the groo ...
See also:
Oil Pump. Components and Components Location
Components
1. Reaction shaft support assembly
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal
6. Bushing-Housing
7. Reaction shaft
8. Bushin ...
To defog inside windshield
1. Set the mode selection switch to the
or
position.
When you select or
position, the system automatically
turns on the outside (fresh) air mode.
2. Set the temperature control knob to th ...
Intake Air Temperature Sensor (IATS). Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside Manifold
Absolute Pressure Sensor and detects the intake air temperature.To calculate precise air quantity, correction of the ai ...
Categories
Kia Optima Manuals
- Kia Optima DL3 2019-2025 Owners Manual
- Kia Optima DL3 2019-2025 Service and Repair Manual
- Kia Optima TF 2011-{2019} Owners Manual
- Kia Optima TF 2011-2025 Service Manual
- Kia Optima MS/Magentis 2000-2005 Owners Manual
Copyright www.kiopman.com 2025