Kia Optima: Installation - Fuel Pump. Repair procedures - Fuel Delivery System - Engine Control/Fuel System - Kia Optima TF 2011-2023 Service ManualKia Optima: Installation

1. Installation is reverse of removal.
Be careful of fuel pump direction (Refer to the groove in the fuel tank).


Fuel pump installation bolt :

2.0 ~ 2.9 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2 lb-ft)



Removal
1. Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line” in this group). 2. Remove the fuel pump service cover (A) in the ...

Fuel Filter. Repair procedures
Replacement 1. Remove the fuel pump (Refer to “Fuel Pump” in this group). 2. Disconnect the electric pump wiring connector (A) and the fuel sender connecto ...

See also:

Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
Specifications Direct control VFS[T/CON]▷ Control type : Normal low type Control Pressure kpa(kgf/cm², psi) 9.81~500.14(0.1~5.1,1.42~72.54) Curren ...

Manifold Absolute Pressure Sensor (MAPS). Schematic Diagrams
Circuit Diagram ...

Adjusting the height of front seat cushion
To change the height (front portion) of the seat cushion, rotate the knob located on the outside of the seat cushion. To lower the seat cushion, rotate the knob toward the front of the vehicle ...

Copyright © www.kiopman.com 2023