Kia Optima: Fuel Filter. Repair procedures
Replacement
1. |
Remove the fuel pump (Refer to “Fuel Pump” in this
group). |
2. |
Disconnect the electric pump wiring connector (A)
and the fuel sender connector (B). ![](images/books/928/syffl0280d.gif)
|
3. |
Remove the cushion pipe fixing clip (C), and then
separate the head assembly (D). ![](images/books/928/syffl0290d.gif)
|
4. |
Remove the return nozzle (B) after releasing the
fixing hook (A). ![](images/books/928/syffl0310d.gif)
|
5. |
Remove the reservoir-cup (B) after releasing the
fixing hooks (A). ![](images/books/928/syffl0300d.gif)
|
6. |
Remove the pre-filter (C) after releasing the fixing
hooks (A,B). ![](images/books/928/syffl0320d.gif)
|
7. |
Separate the electric pump motor (A) from the fuel
filter (B). ![](images/books/928/syffl0330d.gif)
|
8. |
Replace new fuel filter. |
1.
Installation is reverse of removal.
Be careful of fuel pump direction (Refer
to the groo ...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Remove the intake manifold (Refer to “Intake And
Exhaust System” in EM gro ...
Inspection
Rain Sensing Wiper
1.
In IGN2 ON state, if auto switch
input (LIN communication) is ON then both wiper low relay and wiper high
relay outputs are controlled by the rain sensor input s ...
Curtain Airbag (CAB) Module. Description and Operation
Description
Curtain airbags are installed inside the headliner (LH and RH) and protect the driver
and passenger from danger when side crash occurs. The SRSCM determines deployment
of curtain airb ...