Kia Optima: Installation

1.

Installation is reverse of removal.

Accelerator pedal module installation nut:

9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

Accelerator pedal module installation bolt:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Removal

1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...

Delivery Pipe. Repair procedures

...

See also:

Installation
1. Apply a light coat of engine oil to the oil cooler packing surface (A), and then install the oil cooler with fix bolt (B). Tightening torque:44.1 ~ 53.9 N.m (4.5 ~ ...

Description
Network ConfigurationThe Network of the SJB(Smart Junction Box) consists of Low speed CAN as shown in the following figure. Termination ResistorThe cluster has CAN termination resistor. It is p ...

Actual-Measurement Dimensions
Front side member tooling hole (Ø25) Side cover mounting hole (Ø9) Side cover mounting ...

Categories

Kia Optima Manuals

Copyright © www.kiopman.com 2024