Kia Optima: Intake Air Temperature Sensor (IATS). Repair procedures - Engine Control System - Engine Control/Fuel System - Kia Optima TF 2011-2026 Service ManualKia Optima: Intake Air Temperature Sensor (IATS). Repair procedures

Inspection

1. Turn the ignition switch OFF.
2. Disconnect the IATS connector.
3. Measure resistance between the IATS terminals 3 and 4.
4. Check that the resistance is within the specification.

Specification: Refer to “Specification”


Intake Air Temperature Sensor (IATS). Schematic Diagrams
Circuit Diagram ...

Engine Coolant Temperature Sensor (ECTS). Description and Operation
Description Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor that ...

See also:

Smart key. Repair procedures
Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS. 2. Sel ...

To Reset at a Faster Speed
1. Push the RES/ACCEL switch and hold it. 2. Accelerate to desired speed and release the RES/ACCEL switch. While the switch is pressed, the vehicle will gradually gain speed. ...

Components and Components Location
Component Location 1. Fuel filler door open switch 2. Fuel filler door release actuator ...

Copyright www.kiopman.com 2026