Kia Optima: Rear Wheel Speed Sensor. Repair procedures

Rear Wheel Speed Sensor. Components and Components Location

Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor cable ...

Removal

1. Remove the rear wheel and tire. Tightening torque:88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the rear wheel speed ...

See also:

Installation
1. Install the cluster to the cluster housing. 2. Install the cluster fascia panel and crash pad side garnish [LH]. 3. Install the crash pad lower pan ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line (Refer to “Release Residual P ...

Lumbar Support (Driver’s Seat Only)
You can adjust the lumbar support by moving the lever on the right side of the driver’s seatback. Pivoting the lever toward the front of the vehicle increases the lumbar support. Pivoting the ...