Kia Optima: Overhead Console Lamp. Schematic Diagrams

Installation

Room Lamp 1. Reconnect the connector. 2. Install the room lamp assembly. 3. Install the lens. Vanity Lamp 1. Reconnect the vanity lamp connector ...

Overhead Console Lamp. Repair procedures

...

See also:

Electric WGT Control Actuator. Troubleshooting
Signal Waveform ...

Inspection
In the state of IGN1 ON, when multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's i ...

Removal
1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group- crash ...