Kia Optima: Installation
Room Lamp
| 1. |
Reconnect the connector. |
| 2. |
Install the room lamp assembly. |
Vanity Lamp
| 1. |
Reconnect the vanity lamp connector. |
| 2. |
Install the vanity lamp. |
Room Lamp
1.
Disconnect the negative(-) battery
terminal.
2.
Carefully remove the lamp lens
(A) from the room lamp with a flat-tip screwdriver.
...
See also:
Function
Wiper Control
Washer Control Coupled With Wiper
1.
Under IGN2 = ON, wiper LOW relay
is turned ON after T2 from Washer switch ON if washer switch is ON for T1
and wipe ...
Heated Oxygen Sensor (HO2S). Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina
and is installed both upstream and downstream of the Manifold Catalytic Converter.
The sensor output voltage varies in ...
EPB Switch. Repair procedures
Remove
1.
Turn ignition OFF and disconnect
the negative (-) battery cable.
2.
Remove the floor console upper
cover.(Refer to Body group - "Console")
...