Kia Optima: Manifold Absolute Pressure Sensor (MAPS). Repair procedures

Manifold Absolute Pressure Sensor (MAPS). Schematic Diagrams

Circuit Diagram ...

Inspection

1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to " ...

See also:

Front Cross Member. Repair procedures
Replacement 1. Remove the front wheel & tire. Tightening torque:88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1~79.6lb-ft) ...

Installation
Be sure to install the harness wires so they will not pinch or interfere with other parts. ...

Mode Control Actuator. Description and Operation
Description The mode control actuator is located at the heater unit.It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select s ...