Kia Optima: Installation
Side Repeater Lamp
1. |
Install the bulb to the side
repeater lamp assembly. |
2. |
Install the side repeater lamp. |
Door Mirror Turn Signal Lamp
1. |
Install the door mirror turn
signal lamp to the door mirror. |
2. |
Install the door mirror. |
3. |
Connect the battery terminal
(-). |
Side Repeater Lamp
1.
Disconnect the negative (-) battery
terminal.
2.
Open the front door.
3.
Remove the side repeater lamp
assembly by using the a fl ...
Troubleshooting
1.
The lamp switch inputs can be
checked using the GDS.
2.
To check the input value of lamp
switch, select option "Body Control Module".
...
See also:
Removal
1.
Turn the ignition switch OFF.
2.
Disconnect the OTS connector (A).
3.
Remove the OTS.
...
System Operation
Ventilation
1. Set the mode selection switch to the
position.
2. Set the air intake control switch to the outside air position.
3. Set the temperature control knob to the desired position.
4. Se ...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...