Use gauges and testers to adjust correctly the parts to standard values correctly.
Heated Oxygen Sensor (HO2S). Specifications
Specification
HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.5 ~ 4.0 [20°C(68°F)]
HO2S [Bank 1/Sensor 2]
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the connector (A), and then remove the
sensor (B).
...
Front Strut Assembly. Components and Components Location
Components
1. Strut assembly
2. Insulator
3. Bearing
4. Spring upper pad
5. Coil spring
6. Dust cover
7. Spring lower pad
...