Kia Optima: Heated Oxygen Sensor (HO2S). Specifications - Engine Control System - Engine Control/Fuel System - Kia Optima TF 2011-2026 Service ManualKia Optima: Heated Oxygen Sensor (HO2S). Specifications

Specification

HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.5 ~ 4.0 [20°C(68°F)]

HO2S [Bank 1/Sensor 2]

A/F Ratio (λ)
Output Voltage(V)
RICH
Approx. 0.9
LEAN
Approx. 0.04

Item
Specification
Heater Resistance (Ω)
3.3 ~ 4.1Ω[21°C(69.8°F)]


Heated Oxygen Sensor (HO2S). Description and Operation
Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in ...

Heated Oxygen Sensor (HO2S). Schematic Diagrams
Circuit Diagram ...

See also:

Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. Check the rear axle carrier for cracks. ...

Checking the Manual Transaxle Oil Level
1. Raise and suitably support the vehicle. WARNING - Lifting Your Vehicle If you raise your vehicle, always ensure that it is supported at all four jacking or lift points for the vehicle. Do ...

Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions: Drive cautiously and allow extra distance for braking. Avoi ...

Copyright www.kiopman.com 2026