[Front Seat]
1. | Install the connectors and air ventilation control unit. |
2. | Install the air ventilation duct and blower. |
3. | Install the seat back cover. |
4. | Install the seat assembly and seat track cover. |
Rear Glass Defogger Printed Heater. Repair procedures
Inspection
Wrap tin foil around the end of the voltmeter test lead to prevent damaging
the heater line. Apply finger pressure on the ...
Lubricants
Engine
Joint
Lubricants
Quantity
Gasoline 2.0 T-GDI (AT)
BJ
GRB006
145g±10g
TJ
...
Removal
1.
Make sure vehicle does not roll
before setting room side shift lever and T/M side manual control lever to
"N" position.
2.
Remove the battery and the bat ...