[Front Seat]
1. | Remove the front seat assembly. (Refer to Body group - "Front Seat") |
2. | Remove the seat back cover and
cushion cover. (Refer to Body group - "Front Seat") |
3. | Remove the ventilation duct (A)
after loosening screws and removing fixing hook (B).
|
4. | Remove the air ventilation panel
(A) and fixing clip (B) from seat cushion.
|
5. | Remove the climate blower and
duct (A) after loosening the fixing clips and screws.
|
6. | Remove the air ventilation control
unit mounting screws.
|
7. | Disconnect the connector and
remove the air ventilation control unit. [Driver]
|
Fuel Tank Pressure Sensor (FTPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Pressure [kPa (kgf/cm?, in H2O)Output Voltage (V)-6.67 (-0.068, -26.8)0.502.5+6 ...
Troubleshooting
Symption
Suspect area
Remedy
Engine misfire with abnormal internal lower engine noises.
Worn crankshaft bearings
Loose or out of s ...
Wheel replacement
When replacing the metal wheels for
any reason, make sure the new
wheels are equivalent to the original
factory units in diameter, rim width
and offset.
WARNING
A wheel that is not the corr ...