Kia Optima: Fuel Filler Door

Installation

[Front Seat] 1. Install the connectors and air ventilation control unit. 2. Install the air ventilation duct and blower. 3. Install the seat back cover ...

Components and Components Location

Component Location 1. Fuel filler door open switch 2. Fuel filler door release actuator ...

See also:

Installation
1. Install the bulb. 2. Install the trunk trim. ...

Inspection
1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

Replacement
Front brake pads 1. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. Tightening torque:21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft) ...