Kia Optima: Installation

Removal

1. Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position. 2. Remove the battery and the bat ...

Shift Lever. Components and Components Location

Components 1. Shift lever knob & boots assembly 2. Shift lever assembly 3. Control cable assembly 4. Manual control lever (T/M side) ...

See also:

Intake Air Temperature Sensor (IATS). Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. ...

Line Pressure Control Solenoid Vale. Specifications
Specifications Direct control VFS[LINE Pressure]▷ Control type : Normal low type Control Pressure kpa(kgf/cm², psi) 500.14~9.81(5.1~0.1,72.54~1.42) ...

Front Cross Member. Repair procedures
Replacement 1. Remove the front wheel & tire. Tightening torque:88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1~79.6lb-ft) ...