Kia Optima: Inspection

Cluster ionizer. Repair procedures

...

Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad.(Refer to BD group - “Crash Pad�) 3. Loosen the screws and then remov ...

See also:

Reprogramming a Single HomeLink Button
To program a device to HomeLink using a HomeLink button previously trained, follow these steps: 1. Press and hold the desired HomeLink button. Do not release until step 4 has been completed. 2. ...

Installation
Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws then connect the pressure side impact sensor connector. Tightening t ...

Removal
1. Remove the radiator grill upper cover.(Refer to the BD group - "Front bumper") 2. Remove the mounting nut and disconnect the horn connector (B), then ...