Kia Optima: One-Touch Wipers
For a single wiping cycle, push the lever forward and release it with the lever in the OFF position.
The wipers will operate continuously if the lever is pushed forward and held.
✽ NOTICE
- To prevent possible damage to the wipers or windshield, do not operate the wipers when the windshield is dry.
- To prevent damage to the wiper blades, do not use gasoline, kerosene, paint thinner, or other solvents on or near them.
- To prevent damage to the wiper arms and other components, do not attempt to move the wipers manually.
Variable Intermittent Wipers
Set the lever to the INT position and choose the desired wiper interval by turning
the ring. ...
Windshield Washers
In the OFF position, pull the lever gently toward you to spray washer fluid on
the windshield and to run the wipers 2-3 cycles.
Use this function when the windshield is dirty. The spray and wiper ...
See also:
If engine turns over normally but
does not start
1. Check fuel level.
2. With the ignition switch in the LOCK
position, check all connectors at the
ignition coil and spark plugs.
Reconnect any that may be disconnected
or loose.
3. Check th ...
Underdrive Brake Control Solenoid Valve (UD/B_VFS) Description and Operation
Description
Underdrive brake control solenoid valve(UD/B_VFS) is attached
to the valve body. This variable force solenoid valve directly controls
the hydraulic pressure to the underdrive brake. ...
Removal
[Bank 1 / Intake]
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Remove the OTS (A).
3.
Disco ...