Kia Optima: Rain Sensor. Schematic Diagrams

Installation

1. Install the washer reservoir. Before installing the pump motor, check the filter for foreign materi ...

Rain Sensor. Description and Operation

...

See also:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the EWGA connector (A). 3. Remove the shaft ...

Starting the engine
WARNING Always wear appropriate shoes when operating your vehicle. Unsuitable shoes (high heels, ski boots,etc.) may interfere with your ability to use the brake, accelerator pedal, and clutch ( ...

Disassembly
1. Using the special tool (09546-26000), compress the coil spring (A). Tightening torque:58.8 ~ 68.6N.m(6.0 ~ 7.0kgf.m, 43.4 ~ 50.6lb-ft) ...