1. | Ignition "OFF" |
2. | Disconnect evaporator temperature sensor. |
3. | Using the multi-tester, Measure
resistance between terminal "1" and "2" of evaporator temperature sensor. Specification
|
Immobilizer Control Unit. Repair procedures
Replacement
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
...
Removing the Spare Tire
Turn the tire hold-down wing bolt counterclockwise. Store the tire in the reverse
order of removal.
To prevent the jack, jack handle, and tool bag from “rattling” while the vehicle
is in motion ...
Installation
1.
Install the heater control unit.
2.
Install the center fascia panel.
3.
Install the crash pad garnish.
...