Kia Optima: Front Suspension System
- Components and Components Location
- Front Strut Assembly. Components and Components Location
- Front Strut Assembly. Repair procedures
- Front Lower Arm. Repair procedures
- Front Stabilizer Bar. Repair procedures
- Front Cross Member. Repair procedures
Troubleshooting
Troubleshooting
Symptom
Possible cause
Remedy
Hard steering
Improper front wheel alignment
Excessive turning resistance of lower arm ba ...
Components and Components Location
Components Location
1. Drive shaft
2. Lower arm
3. Front disk
4. Front strut assembly
5. Steering gearbox
6. Front stabilizer bar
7. Sub frame
...
See also:
Heated Oxygen Sensor (HO2S). Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina
and is installed both upstream and downstream of the Manifold Catalytic Converter.
The sensor output voltage varies in ...
Inspection
1.
Check signal waveform of Input
& output speed sensor using the GDS.
Specification: Refer to "Signal
Wave Form" section.
...
Inspection
1.
Ignition "OFF"
2.
Disconnect the connector of temperature
control actuator.
3.
Verify that the temperature control
actuator operates to t ...
Copyright © www.kiopman.com 2025