Kia Optima: Flashing Headlights

Auto light control

To operate the auto light, turn the knob on the end of the control lever. If you set the knob to “AUTO� the tail lights and headlights will be turned on or off automatically according to the ...

Turn Signals

The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down. Green arrow indicators on the instrument panel indicate which turn signal ...

See also:

Inspection
Speedometer 1. Adjust the pressure of the tires to the specified level. 2. Drive the vehicle onto a speedometer tester. Use wheel chocks (A) as appropriate. ...

Line Pressure Control Solenoid Vale. Specifications
Specifications Direct control VFS[LINE Pressure]▷ Control type : Normal low type Control Pressure kpa(kgf/cm², psi) 500.14~9.81(5.1~0.1,72.54~1.42) ...

Function
Wiper Control Washer Control Coupled With Wiper 1. Under IGN2 = ON, wiper LOW relay is turned ON after T2 from Washer switch ON if washer switch is ON for T1 and wipe ...