Kia Optima: Engine Electrical System

Muffler > Repair procedures

Removal and Installation 1. Remove the front muffler (B) after disconnecting the oxygen sensor connector (A). Tightening torque:39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ...

General Information

...

See also:

Components (2)
1. Backing plate 2. Operating lever 3. Upper spring 4. Lower spring 5. Adjuster 6. Shoe hold down spring 7. Shoe hold down pin 8. Shoe ...

Removal
Room Lamp 1. Disconnect the negative(-) battery terminal. 2. Carefully remove the lamp lens (A) from the room lamp with a flat-tip screwdriver. ...

Inspection
TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side check point. If ...