Installation
Room Lamp
1.
Reconnect the connector.
2.
Install the room lamp assembly.
3.
Install the lens.
Vanity Lamp
1.
Reconnect the vanity lamp connector ...
Inspection
Front Seat Heater Switch
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the floor console upper
cover.(Refer to the BD group - "Console")
...
3 Point Rear Center Belt
To fasten the rear center belt
1. Slowly pull the tongue plates out from the retractor.
2. Insert the tongue plate (A) into the open end of the buckle (C) until an audible
“click" is heard, ...