Kia Optima: Driver’s Door Power Window Controls
The driver’s door has a master power window switch that controls all the windows in the vehicle. the ignition switch must be in the ON position for power windows to operate. To open a window, press down on the front portion of the corresponding switch. To close a window, pull up on the front portion of the corresponding power window switch.
Power window timer (if equipped)
The power windows can be operated for approximately 30 seconds after the ignition key is removed or turn to the ACC or LOCK position. However, if the front doors are opened, the power windows cannot be operated even within the 30 seconds after the ignition key removal.
Power Window Lock Switch Feature
The driver can lock the power window switches on all passenger doors by depressing the left side (flat portion) of the “WINDOW LOCK” switch located on the driver’s door to ON (flat side down). When the power window lock switch is ON, the driver’s master control can not operate the passenger door power windows either.
WARNING - Power Windows
Keep the power window lock switch in the driver’s door in the ON/“LOCK” (left side/flat portion of switch down) position, except when someone is operating a passenger door window. Serious injury can result (especially to children) from unintentional window operation.
✽ NOTICE
If you notice buffeting and pulsation (wind shock) with either side window open, you should open the opposite window slightly to reduce the condition.
Power Windows
Passenger Doors Power Window ControlsDefogging logic
To reduce the probability of fogging up inside of the windshield, the air intake
or air conditioning are controlled automatically according to certain conditions
such as or
position. To cancel ...
Components and Components Location
Components Location
1. Overdrive clutch (OD/C)
2. One way clutch (OWC)
3. Low & Reverse brake (LR/B)
4. Underdrive brake (UD/B)
5. 26 brake(26/B)
6. 35R cl ...
Removal and Installation
1.
Loosen the drain plug, and then
drain the engine coolant. Remove the radiator cap to drain with speed.
2.
Remove the drive belt (A) after
turning the drive belt te ...