Kia Optima: Canister Close Valve (CCV). Description and Operation
Description
Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage detecting system operates.
Installation
1.
Installation is the reverse order of removal.
...
Canister Close Valve (CCV). Specifications
Specification
Item
Specification
Coil Resistance (Ω)
19.8 ~ 21.8 [20°C(68°F)]
...
See also:
Engine Exhaust Gas Precautions
WARNING
Engine exhaust gases contain carbon monoxide (CO). Though colorless and odorless,
it is dangerous and could be lethal if inhaled. Follow the instructions below to
avoid CO poisoning. ...
Inspection
1.
Connect the battery voltage and
check the blower motor rotation.
2.
If the blower motor voltage is
not operated well, substitute with a known-good blower m ...
Removal
1.
Remove the timing chain. (Refer
to Timing system in this group)
2.
Install a stopper pin (A) after
compressing the balance shaft chain tensioner.
3.
...
Copyright © www.kiopman.com 2023