Kia Optima: Blower Resistor. Repair procedures

Replacement

1. 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad lower cover (A). 3. Disconnect the power mosfet connector ...

Inspection

1. Measure terminal-to-terminal resistance of the blower resistor. 2. measured resistance is not within specification, the blower resistor must be replaced. (After re ...

See also:

Intake Air Temperature Sensor (IATS). Schematic Diagrams
Circuit Diagram ...

Replacement
1. Remove the rear wheel & tire. Tightening torque:88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. Slow dow ...