Kia Optima: Blower Motor. Repair procedures

Blower Unit. Repair procedures

Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad and heater blower unit.(Refer to HA group-heater unit) 3. Re ...

Inspection

1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor voltage is not operated well, substitute with a known-good blower m ...

See also:

Installation
• Install the component with the specified torques. • Note that internal damag ...

Inspection
1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” ...

Disassembly
1. Disconnect the negative (-) battery terminal. 2. Remove the front tire (A) from hub assembly. Tightening torque : 10~15N.m (9~11kgf.m, 7.37~11lbf.ft ...