1. | Connect the battery voltage and
check the blower motor rotation.
|
2. | If the blower motor voltage is not operated well, substitute with a known-good blower motor and check for proper operation. |
3. | If the problem is corrected, replace the blower motor. |
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and
2.
4.
...
Cigarette Lighter
To operate the cigarette lighter, press it in and release it. When it is heated,
it automatically pops out ready for use. If the engine is not running, the ignition
switch must be in the ACC pos ...
Replacement
1.
Remove the rear wheel & tire.
Tightening torque:88.3
~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...