Kia Optima: Battery Saver Function
✽ NOTICE
- The purpose of this feature is to prevent the battery from being discharged. The system automatically turns off the small light when the driver removes the ignition key and opens the driver-side door.
- With this feature, the taillights will be turned off automatically if the
driver parks on the side of the road at night. If necessary, to keep the taillights
on when the ignition key is removed, perform the following:
1) Open the driver-side door.
2) Turn the taillights OFF and ON again using the light switch on the steering column.
Lighting
...
Lighting Control
The light switch has a Headlight and a Parklight position.
To turn the lights on, twist the knob on the end of the control lever.
Parklight position ()
When the light switch is in the parklight p ...
See also:
TPMS Sensor Description and Operation
Description
1.
Function
•
By detecting the pressure, temperature, acceleration, and battery condition, transmit information to ECU by a wireless RF.
•
Wheel location is recog ...
Inspection
Connecting Rod
1.
Check the connecting rod end
play.Using a feeler gauge, measure the end play while moving the connecting
rod back and forth.
End play :Standard : 0.10~ ...
Power Door Lock Switch Repair procedures
Inspection
Driver Door Lock Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
3.
Disconnect t ...
Copyright © www.kiopman.com 2022