Replacement
1.
Recover the refrigerant with
a recovery/ recycling/ charging station.
2.
Disconnect the negative (-) battery
terminal.
3.
Remove the discharge line ...
Replacement (Without EPB)
Rear brake pads
1.
Loosen the guide rod bolt (B)
and pivot the caliper (A) up out of the way.
Tightening torque:21.6
~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)
...
To Reset at a Faster Speed
1. Push the RES/ACCEL switch and hold it.
2. Accelerate to desired speed and release the RES/ACCEL switch. While the switch
is pressed, the vehicle will gradually gain speed. ...