To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the
accelerator pedal. Increased speed will not interfere with the cruise control operation
or change the set speed.
To ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and
IG ON.
Specification:
Refer to " ...
Installation
1.
Remove ignition key from the
vehicle.
2.
Disconnect the negative (-) cable
from battery and wait for at least three minutes.
3.
Install the ancho ...