1. | Disconnect the negative (-) battery terminal. |
2. | Loosen the mounting bolts and
then remove the under cover (A).
|
3. | Disconnect the connector and
then remove the ambient temperature sensor (A).
|
4. | Installation is the reverse order of removal. |
Operating door locks from inside the vehicle
With the door lock button
To unlock a door, push the door lock button (1) to the “Unlock” position.
The red mark (2) on the button will be visible.
To lock a door, push the door lock button ...
Inspection
1.
Check the bushing for wear and
deterioration.
2.
Check for all bolts and nut.
...
Component (1)
Connector Pin Information
No
Connector A (14P)
No
Connector B (26P)
1
GND 1
1
-
15
...