Emergency trunk lid release cable
1.Take the cover out by putting the driver or key at left side. 2.Pull the
hook of cable. 3. After use, securely close the cover.
CAUTION
While driving the vehicle, Don’t use it. Unexpected ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and
2.
4.
...
Replacements
Movable glass Replacement
1.
Open the movable glass fully.
2.
Remove the folding cover (A).
3.
After loosening the mounting
screws, then remove the ...