Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Remove the resonator and the air intake hose (Refer
to “Intake And Exhaust ...
Windshield wipers
Operates as follows when the ignition switch is turned ON.
MIST : For a single wiping cycle, push the lever upward and release it with the
lever in the OFF position. The wipers will operate conti ...
Installation
1.
Remove the ignition key from
the vehicle.
2.
Disconnect the battery negative
cable and wait for at least three minutes.
3.
Install the seat belt ...