Kia Optima: A/C Pressure Transducer. Components and Components Location

Receiver-Drier. Repair procedures

Replacement 1. Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser. Tightening torque :20~25N.m (2.0~2.5kgf.m, 14.5~18.2lb-ft) ...

A/C Pressure Transducer. Description and Operation

Description A/C pressure transducer convert the pressure value of high pressure line into voltage value after measure it. By converted voltage value, engine ECU controls cooling fan by operating ...

See also:

Tilt Steering
To change the steering wheel angle, pull up on the lock release (located beneath the steering column), adjust the steering wheel to the desired angle, then release the lock-release to lock the s ...

Rail Pressure Sensor (RPS). Description and Operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in ...

Replacement
1. 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad lower cover (A). 3. Disconnect the power mosfet connector ...