Kia Optima: Removal
| 1. | Remove the shift lever knob. (Refer to the BD group - "Console") |
| 2. | Remove the console upper cover
(A).
|
| 3. | Disconnect the connector from the console upper cover. |
| 4. | Remove the multimedia jack (B)
from the console under cover after releasing the fixed hooks (A).
|
Installation
1.
Install the multimedia jack.
2.
Connect the multimedia jack connector.
3.
Install the console upper cover.
4.
Install the shift lever knob. ...
See also:
Hazard warning flasher
Type A
Type B
The hazard warning flasher should be used whenever you find it necessary to stop
the car in a hazardous location. When you must make such an emergency stop, always
pull off the ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV terminals 1 and
2.
4.
...
Installation
In the case of the vehicle equipped with immobilizer
or button engine start system, perform "Key Teaching" procedure together
...
Categories
Kia Optima Manuals
- Kia Optima DL3 2019-2026 Owners Manual
- Kia Optima DL3 2019-2026 Service and Repair Manual
- Kia Optima TF 2011-{2019} Owners Manual
- Kia Optima TF 2011-2026 Service Manual
- Kia Optima MS/Magentis 2000-2005 Owners Manual
Copyright www.kiopman.com 2026