1. | Connect the horn connector, then reassemble the horn. |
2. | Reassemble the front bumper. |
Inspection
1.
Measure terminal-to-terminal
resistance of the blower resistor.
2.
measured resistance is not within
specification, the blower resistor must be replaced. (After re ...
Storing positions into memory using the buttons on the door
Storing driver’s seat positions
1. Shift the shift lever into P while the ignition switch is ON. 2. Adjust
the driver seat to position comfortable for the driver. 3. Press SET button on
the contr ...
Installation
1.
Installation is reverse of removal.
...