Kia Optima: Torque Converter Control Solenoid Valve (T/CON_VFS). Repair procedures - Automatic Transaxle Control System - Automatic Transaxle System - Kia Optima TF 2011-2020 Service ManualKia Optima: Torque Converter Control Solenoid Valve (T/CON_VFS). Repair procedures

Torque Converter Control Solenoid Valve (T/CON_VFS). Schematic Diagrams
Circuit Diagram ...

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between sensor signal terminal and sensor g ...

See also:

3 Point Rear Center Belt
To fasten the rear center belt 1. Slowly pull the tongue plates out from the retractor. 2. Insert the tongue plate (A) into the open end of the buckle (C) until an audible “click" is heard, ...

Parking Brake Assembly Repair procedures
Removal Parking Brake Pedal 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group - crash pad ...

Suspension System. Tires/Wheels. Wheel. Repair procedures
Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque:88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Copyright © www.kiopman.com 2020