Kia Optima: Power Door Locks
- Components and Components Location
- Power Door Lock Actuators. Repair procedures
- Power Door Lock Relay. Repair procedures
- Power Door Lock Switch. Repair procedures
Troubleshooting
Troubleshooting
Symptom
Possible cause
Remedy
Tachometer does not operate
Cluster fuse (10A) blown
Check for short and replac ...
Components and Components Location
Component Location
1. Driver power window switch
2. Door lock switch
3. BCM (Body Control Module)
4. Front door lock actuator
5. Rear door lock actuator
6. Tru ...
See also:
Body Control Module (BCM) Repair procedures
Trouble Diagnostics When Using GDS
1.
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output value and drives the ac ...
Inspection
Inspect Rotor
1.
Check that there is continuity between the slip rings
(C).
2.
Check that there is no continuity between the slip
...
Accelerator Position Sensor (APS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
AcceleratorPositionOut ...
Copyright © www.kiopman.com 2021