Heater Unit. Repair procedures
Replacement
1.
Disconnect the negative (-) battery
terminal.
2.
Recover the refrigerant with
a recovery/ recycling/ charging station.
3.
When the e ...
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal (A).
Tightening torque
:4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) ...
Removal
•
DON’T remove the camshaft position sensor
while the engine is running or right after engine is turned
of ...