Rear Parking Assist System Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the smart junction box cover.
3.
Remove the crash pad side switch assembly (A) as shown below picture.
  ...
Measuring Body Dimensions
1.
Basically, all measurements
in this manual are taken with a tracking gauge.
2.
When a measuring tape is
used, check to be sure there is no elongation, twis ...
ATF Warmer Description and Operation
Description
The ATF warmer is mounted on the valve body cover to reduce
oil viscosity friction by increasing oil temperature under cold
condition, which in turn improves fuel efficiency. It is ...