Kia Optima: Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications - 35R Clutch Control Solenoid Valve(35R/C_VFS). Description and Operation - Automatic Transaxle System - Kia Optima TF 2011-2026 Service ManualKia Optima: Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications

Specifications

Direct control VFS[35R/C]

▷ Control type : Normal low type

Control Pressure kpa(kgf/cm², psi)
500.14~9.81(5.1~0.1,72.54~1.42)
Current value(mA)
50~850
 Internal resistance(Ω)
5.1


Underdrive Brake Control Solenoid Valve(UD/B_VFS). Description and Operation
Description Underdrive brake control solenoid valve(UD/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the underdrive brak ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS). Schematic Diagrams
Circuit Diagram ...

See also:

Withheld alarm
When the alarm is armed, the alarm will not sound if the trunk lid is opened with either the key or the transmitter. However, if the trunk lid is not opened completely within two seconds after unlo ...

The Importance of Using Safety Belts
There are four very important reasons to use safety belts even with an air bag supplemental restraint system. They: help keep you in the proper position (away from the air bag) when it inflates. ...

Repair procedures
Adjustment TCM Learning When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed. In the following case, TCM learning is requir ...

Copyright www.kiopman.com 2026