Kia Optima: Underdrive Brake Control Solenoid Valve(UD/B_VFS). Description and Operation
Description
Underdrive brake control solenoid valve(UD/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the underdrive brake.
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS). Specifications
Specifications
Direct control VFS[35R/C]▷ Control type : Normal low type
Control Pressure kpa(kgf/cm², psi)
500.14~9.81(5.1~0.1,72.54~1.42)
Curren ...
See also:
Adjustment
Parking Brake Shoe Clearance Adjustment
1.
Raise the vehicle, and make sure
it is securely supported.
2.
Remove the rear tire and wheel.
3.
Remove the plug ...
Headrest
The rear seat(s) is equipped with headrests in the outboard seating positions
for the occupant's safety and comfort.
The headrest not only provides comfort for passengers, but also helps prot ...
Removal
1.
Turn the ignition switch OFF and disconnect the negative
(-) battery cable.
2.
Disconnect the accelerator position sensor connector
(A).
...
Copyright © www.kiopman.com 2025